Series II Photocell Kit - 35048R
THIS SAFETY SENSOR KIT IS BACKWARD COMPATIBLE WITH ALL GENIE OPENERS MANUFACTURED ON
OR AFTER 1995. THIS SAFETY SENSOR KIT IS NOT COMPATIBLE WITH GARAGE DOOR OPENERS
MANUFACTURED BEFORE 1995 (THOSE USED 3-PIN CONNECTORS AT THE OPERATOR HEAD).
- Compatible with ALL Genie machines with existing Safety Beams
- Kit includes both Infrared eyes, brackets, bell wire, hardware and installation instructions
- Easy do-it-yourself installation
- NOTE: This item will replace or repair your Genie Safe-T-Beam System.
- The safety sensor kit listed here is the only one made at this time.
- All other safety eyes models have been discontinued.
THIS SAFETY SENSOR KIT IS BACKWARD COMPATIBLE WITH ALL GENIE OPENERS MANUFACTURED ON
OR AFTER 1995. THIS SAFETY SENSOR KIT IS NOT COMPATIBLE WITH GARAGE DOOR OPENERS
MANUFACTURED BEFORE 1995 (THOSE USED 3-PIN CONNECTORS AT THE OPERATOR HEAD).
Series II Photocells Only - 20374T
- Includes both Infrared eyes, and installation instructions
- Used to replace the above safety eyes only
| $42.95 |
| $27.95 |
Photocells Only - 36046R (Not For Series II Systems)
- STB Modules, Receiver and Transmitter Only
- Includes Both Infrared Eyes, Will Not Work With Series II Systems
| $29.95 |
PhotoCell Connector Pigtail - 20302R
- For Use With Pre-Series II
- For 2 Wire Conductor Clip-In Style PhotoCells
- Includes 1 Foot or Wire For Splice (Set of Two)
| $6.95 |
| Genie and Overhead Replacement Photocells |
Wall Control 2 Wire
- Wall Control 2 Wire
- 24' Lenght approx.
| $2.75 |
36054A Mounting Brackets For 36046 R Photocells
- STB Modules Brackets Only, Photocells not Included
- For use With 36046R Photocells
- Will Not Work With Series II Systems
| $19.45 |
Photocell Bracket Extension Brackets - 34439S.S
- For Use With Above 35084R Photocells, 4 Items
- Extends Photocell Out To Install Photocells In Different Configurations
| $8.95 |
| Overhead Door®, CodeDodger®, Intellicode® and Genie® are registered trademarks of the Overhead Door Corporation. |
| Our main office hours are Monday thru Friday from 8:00am to 5:00pm central time. Questions please call us at 1-888-341-3003(during main office hours for direct assistance) You can always email us or leave a message if calling after hours. Email Address: GenieRemotesOnline.com |
 |  |  |  |  |  |  |  |
| Genie Intellicode Remotes 390MHz Replacement For All Intellicode Remotes Openers Made From 1995-Today Use Git-1 Git-2 Git-3 Openers Made From 1998-Today Can Use GITR-3 GICT390-1 GICT390-3 GIFT390-1 GIT390-4 GT-31 |
| Genie Intellicode Remotes 315/390MHz Replacement For All Intellicode Remotes Openers Made From 1998-Today Can Use GIFT-1 GICTD-1 GICTD-3 |
| Genie Intellicode Keypads 390MHz Replacement For All Intellicode Keypads Openers Made From 1995-Today Can Use GWKP GWKIC |
| Genie Intellicode Remotes |
| Genie Intellicode Keypads |
| Replacement Remotes 390MHz Replacement Remotes For Openers With 9 or 12 Dip Switches And 390MHz GT912 GPT90-3 375LM |
| Replacement Keypads Work With 9 - 12 Dip Switch Receivers and Remotes The Frequency Must Be 390MHz GPWK-12 387LM |
| 9 or 12 Dip Switch Remotes |
| 9 or 12 Switch Keypads |
| Genie Replacement Remotes 390MHz Replacement Remotes For Openers With 12 Dip Switches And 390MHz GPT90-1 MAT90-1 GE390 G220-12 |
| 12 Switch Remotes 390MHz |
| Genie Replacement Remotes 390MHz Replacement Remotes For Openers With 9 Dip Switches And 390MHz G220-9S GD390 |
| 9 Switch Remotes 390MHz |