| Genie and Overhead's Most Common Chain Drive Repair Parts |
Chain Glide Carriage Kit - 35263R For Listed Models
PCG400, PCG600, OCG510, OCG710, GCG350
PCG400, PCG600, OCG510, OCG710, GCG350
- Carriage for Chain Glide models listed above only
- Inner slide must be replaced with the carrage which is included
IC250, IC250/B, PMX60, PMX65, PMX70, PMX75, PMX80, PMX300IC/A, PMX500IC/A, PMX300IC/B,
PMX500IC/B
LEGACY 496, LEGACY 696, LEGACY 496CD/A, LEGACY 696CD/A, LEGACY 496CD/B, LEGACY 696CD/B
ACL SERIES, RCD SERIES, PASSPORT 286, 386, 286CD, 386CD
PMX500IC/B
LEGACY 496, LEGACY 696, LEGACY 496CD/A, LEGACY 696CD/A, LEGACY 496CD/B, LEGACY 696CD/B
ACL SERIES, RCD SERIES, PASSPORT 286, 386, 286CD, 386CD
- Carriage for Chain Glide models listed above only
| $24.95 |
| $22.50 |
25605R Inner Slide
- Carriage Inner slide
- Original Genie Opener Part
| $7.50 |
24701R Chain Drive Limit Dogs
- External Limit Switches
- Replacement for Genie T-Rail Openers
- Original Genie Opener Part
| $7.75 |
16975R Chain Drive A-Style Limit
- A Style Limit Switches
- Replacement For Genie Made Openers
- Set of 2 Limits, Replace Clip On Type
27096A Chain Drive Gear
| $11.75 |
21957R Sequensor
- Sequensor
- Original Genie Opener Part
| $24.95 |
24640R Chain Guide and Race
- Chain Guide and Race
| $12.95 |
33355A Opener Worn Gear
- Opener Worn Gear
| $9.95 |
27091A Limit Switch Gear
- Chain Drive Limit Switch Gear
| $7.75 |
20456R
Pulley Support Complete Kit
| $2.25 |
8026H04
Bolt, 5/15-18 x 1.13
| $2.50 |
26002B
Pulley Bushing
| $0.75 |
3783A04
| $6.75 |
25999E
Pulley Support Full Chain
| $1.75 |
26004A
Bolt Retainer
| $7.75 |
26001A04
Pulley Bracket
| $7.50 |
26966D
Pulley Full Chain
8094C04 Screws (2)
- 2 Screws #10-24 x 1/2
| $1.75 |
27191A Sprocket
- Sprocket Chain Drive
| $6.75 |
29027A Sprocket Saddle
- Sprocket Saddle
| $9.35 |
26013B Curved Door Arm
- Curved Door Arm
| $10.75 |
21123B Release Cord and Knob
- For Use With All 7' 6" High Doors
| $4.25 |
19863R Clip and Collar Set of Two
- Set of Two Clips 19807A04
- Set of Two Collars 19806A04
| $5.00 |
26012B Straight Door Arm
- Straight Door Arm
21019B04 Rail Clamps
- 2 Rail Clamps Only
| $6.75 |
Wall Control 2 Wire
- Wall Control 2 Wire
- 24' Lenght approx.
| $2.95 |
19792A04 Door Opener Arm Bracket
- Door Arm Mountng Bracket
- 19792B Old Part Number
| $6.75 |
| $4.00 |
35421A Header Bracket
- Header Bracket
| $6.25 |
33467A04 Rail Strap
- Rail Strap
4 Bolts/4 Nuts For Rail Clamps
- 4 Bolts 22438A04
- 4 Nuts 2412C05
| $4.90 |
35421A Old Style Header Bracket
- Old Style Header Bracket
2 Bolts/2 Nuts For Arms
- 2 Bolts 5973Q04
- 2 Nuts 24121D05
21123C Release Cord and Knob
- For Use With All 8' High Doors
| $4.50 |
Aero Lubriplate for GENIE Openers
- 1.75 oz. lubricant is specifically used for GENIE screw drive openers
- Apply directly to the entire length of the screw drive system
| $3.95 |
Garage Door Opener Lubricant Genie Brand
- 3/4 oz Lubricant for Screw Drive openers
- Model: GLU-3
- Product Code: 35164R
31057R Opto-Luctor
- Opto-Luctor
- Original Part 31056A
| $13.25 |
18004B Motor Start Capacitor
- Motor Start Capacitor
| $17.95 |
19988A Motor Start Capacitor
- Motor Start Capacitor
| $17.75 |
27251A Opener Worn Gear
- Opener Worn Gear
| $8.95 |
| $6.75 |
18295A04 Header Bracket
| $1.25 |
81175B17 Speed Nut
| $1.25 |
18586A04 Pin
| $1.25 |
8091A04 Lags 5/16 x 2
- Includes 2 Lags
| $16.75 |
27098A03 Drive Shaft
| $1.75 |
24311B17 Retaining Ring
| $11.75 |
27096A Drive Gear
| $1.00 |
27089A Drive Shaft Washer
33223A Drive Shaft Bushing
| $14.25 |
35223R Lower Gear Housing
| $1.00 |
27250A30 Screw, 8-16 x 3-3/8
| The Above Bracket Is Discontinued Use the New Header (35421A) Bracket Below! |
| $4.00 |
35421A Header Bracket
- Header Bracket
| $7.25 |
33467A04 Rail Strap
- Rail Strap
| Overhead Door®, CodeDodger®, Intellicode® and Genie® are registered trademarks of the Overhead Door Corporation. |
| $22.95 |
33355A Opener Worn Gear
- Opener Worn Gear
| $8.95 |
27092A Worm Limit Gear
- Chain Drive Limit Worm Gear
| $7.75 |
27150A Bullet Chain Drive
- Bullet Chain Drive
| $8.75 |
| Our main office hours are Monday thru Friday from 8:00am to 5:00pm central time. Questions please call us at 1-888-341-3003(during main office hours for direct assistance) You can always email us or leave a message if calling after hours. Email Address: info@GenieRemotesOnline.com |
 |  |  |  |  |  |  |  |
| Genie Intellicode Remotes 390MHz Replacement For All Intellicode Remotes Openers Made From 1995-Today Use Git-1 Git-2 Git-3 Openers Made From 1998-Today Can Use GITR-3 GICT390-1 GICT390-3 GIFT390-1 GIT390-4 GT-31 |
| Genie Intellicode Remotes 315/390MHz Replacement For All Intellicode Remotes Openers Made From 1998-Today Can Use GIFT-1 GICTD-1 GICTD-3 |
| Genie Intellicode Keypads 390MHz Replacement For All Intellicode Keypads Openers Made From 1995-Today Can Use GWKP GWKIC |
| Genie Intellicode Remotes |
| Genie Intellicode Keypads |
| Replacement Remotes 390MHz Replacement Remotes For Openers With 9 or 12 Dip Switches And 390MHz GT912 GPT90-3 375LM |
| Replacement Keypads Work With 9 - 12 Dip Switch Receivers and Remotes The Frequency Must Be 390MHz GPWK-12 387LM |
| 9 or 12 Dip Switch Remotes |
| 9 or 12 Switch Keypads |
| Genie Replacement Remotes 390MHz Replacement Remotes For Openers With 12 Dip Switches And 390MHz GPT90-1 MAT90-1 GE390 G220-12 |
| 12 Switch Remotes 390MHz |
| Genie Replacement Remotes 390MHz Replacement Remotes For Openers With 9 Dip Switches And 390MHz G220-9S GD390 |
| 9 Switch Remotes 390MHz |
| $1.75 |
| $9.75 |
| $3.25 |
| $2.25 |